Home / All / Roller Chain / O-Ring Chain /

Standard O-Ring roller conveyor chain | o ring conveyor belts and chain | o ring chain assembly tool

Standard O-Ring roller conveyor chain | o ring conveyor belts and chain | o ring chain assembly tool

Standard O-Ring roller  conveyor chain | o ring conveyor belts and chain | o ring chain assembly tool
Standard O-Ring roller  conveyor chain | o ring conveyor belts and chain | o ring chain assembly toolStandard O-Ring roller  conveyor chain | o ring conveyor belts and chain | o ring chain assembly toolStandard O-Ring roller  conveyor chain | o ring conveyor belts and chain | o ring chain assembly toolStandard O-Ring roller  conveyor chain | o ring conveyor belts and chain | o ring chain assembly toolStandard O-Ring roller  conveyor chain | o ring conveyor belts and chain | o ring chain assembly tool
CategoriesO-Ring Chain
BrandZMIE Chain Manufacturer
Material:alloy steel/Stainless steel
Heat Treatment:Through hardening
Color:Natural
Shipping:Support Sea freight.Express.Land freight.
FOB portShanghai/Ningbo
Terms of PaymentL/C, Western Union, T/T, Paypal
Download
Update TimeDec 3,2024
Detail Information
Standard O-Ring roller  conveyor chain | o ring conveyor belts and chain | o ring chain assembly tool
 stainless steel chain supplier
 stainless steel chain supplier
ZMIE
Chain No.
Pitch
Roller
diameter
Width
between
inner plates
Pin
diameter
Pin
length
Inner
plate
depth
Plate
thickness
Ultiate
tensile
strength
Weight
per meter
P
d1
max
b1
min
d2
max
L
max
Lc
max
h2
max
T
max
Q
min
q
mm
mm
mm
mm
mm
mm
m
mm
KN
kg/m
40RO
12.70
7.94
7.85
3.98
19.80
21.80
12.00
1.50
16.2
0.67
50RO
15.875
10.16
9.40
5.09
23.50
25.70
15.00
2.00
25.0
1.19
60RO
19.05
11.91
12.58
5.94
28.80
31.50
17.80
2.40
35.3
1.62
80RO
25.40
15.88
15.88
7.94
40.10
43.00
23.40
3.20
57.8
2.70
08BRO
12.70
8.51
7.75
4.45
19.60
21.60
11.80
1.50
17.8
0.74
10BRO
15.875
10.16
9.65
5.08
23.20
25.50
14.70
1.70
22.2
1.00
12BRO
19.05
12.07
11.68
5.72
28.60
31.30
16.10
1.80
28.9
1.30
16BRO
25.40
15.88
17.02
8.28
39.80
42.80
21.00
4.0/3.2
60.0
2.90

Both standard roller chain and o-ring roller chain are manufactured to ANSI B29.1 chain standards. This means both style roller chains are manufactured to set dimensions, which allows both styles to run on the same sprockets. The main difference is that o-ring roller chain uses an o-ring between the inner and outer plates, whereas standard chain is open without any seal. O-ring chains were originally developed as drive chains for motorcycles, but the technology is also used in standard industrial chains. A vacuum process is used to apply initial lubricant to the chain bearings, which are then sealed with an O-ring. This type of lubrication in combination with a seal means that these chains require no further lubrication throughout their entire service life, so they can be categorised as “low-maintenance”. O-ring chain has been tested and results have shown that O-ring chain can last up to 10 times longer than standard roller chain. The O-ring chain is named for the rubber O-rings built into the space between the outside link plate and the inside roller link plates. O-rings are included as a way to improve lubrication to the links of power transmission chains, a service that is vitally important to extending their working life. These rubber fixtures form a barrier that holds factory applied lubricating grease inside of the pin and bushing wear areas. Further, the rubber O-rings prevent dirt and other contaminants from entering the inside of the chain linkages, where such particles would otherwise cause significant wear. This O-Ring roller chain has heat treated & shot peened components that greatly extend the working life and strength of the chain. 


Related Products
    Request a Quote
    Fill all information details to consultwith us to get sevices from us
    *Email
    *Title
    *Content
    zmie chain
    overhead conveyor

    Overhead Conveyor

    www.china-conveyors.com
    What ZMIE Provide
    Overhead Conveyor
    overhead conveyor chain